top of page

The BarnMini Series

BarnMini Top
BarnMiniSeries Page

The BarnMinis are ideal for standalone solutions and solve everything from a simple task to more comprehensive solutions. BarnMinis can be used in conjunction with other Barnfind products to empower complete distributed systems in larger facilities.

All BarnMini modules can be used as a standalone box or in a more sophisticated system with BarnOne or BarnColor.

BarnMini - 01

BarnMini-01.png

BNC to SFP converter

The BarnMini series are made of robust materials in an elegant design. With a transparent connection between the in/out BNC connectors and the SFP, BarnMini-01 converts signals in both directions. Depending on the SFP being used, it converts signals to/from:

SDI – optical, Analog Video – SDI, HDMI – SDI.

BarnMini - 02

BarnMini-02.png

SFP to SFP converter

BarnMini-02 can be used for fiber conversion between multimode and single mode, Ethernet to fiber, CWDM fiber color conversion or any other combination of signals depending on the SFP selections.

BarnMini-02 is a “Norwegian army knife” –  application can be changed on the fly by replacing the SFPs.

BarnMini - 03

BarnMini-03.png

HDMI to SFP (SDI) converter

BarnMini-03 converts a HDMI signal to SDI via the SFP port. Optical fiber or coaxial copper cable can be used as transport medium depending on SFP inserted.

BarnMini - 04

BarnMini-04.png

SFP (SDI) to HDMI converter

BarnMini-04 converts SDI from the SFP port to HDMI. Optical fiber or coaxial copper cable can be used as transport medium depending on SFP inserted.

BarnMini - 05

BarnMini-05.png

TCP/IP to RS422/RS485 and GPI/O

BarnMini-05 offers a compact way to convert an RS422/RS485 serial data, 4x GPI, 4x GPO to Ethernet.

The unit serves as an intelligent bridge for third-party devices. GPI and GPO are often used to transfer tally between two locations.

BarnMini-05 can control optical changeover switches such as the
BarnMini-06 in a redundancy setup.

BarnMini - 06

BarnMini-06.png

Optical changeover switch

BarnMini-06 is an optical changeover switch that is controlled by a GPO signal. BarnMini-05BTF1-41 or 3rd party products may be used to control the switch.

A typical application is to select between two different redudant fiber paths.

BarnMini - 07

BarnMini-07.png

Optical Multiplexer

BarnMini-07 is a 4-channel CWDM mulitplexer that can be used for e.g. transportation of 4x optical SDI, ASI, MADI or data on one single fiber.

Mutliple BarnMini-07 can be combined to make an even bigger multiplexer and it is comptabible with the ITU CWDM standard.

BarnMini - 08

BarnMini-08.png

Optical splitter

BarnMini-08-1:2 and BarnMini-08-1:4 are devices that split the optical signal into 2 or 4 identical copies.

Typical use cases are distribution or signal duplication for redudancy; usually combined with CWDM optical multiplexers for maximum utilization of the fibers.

BarnMini - 11 (12G)

BarnMini-11.png

BNC to SFP converter

This is the most popular BarnMini. BarnMini-11 is the heir of BarnMini-01, increasing the maximum bandwidth up to 12G-SDI used by 4K video.

BarnMini-11 converts signals in both directions. Depending on the SFP being used, it converts signals to/from SDI – optical, Analog Video – SDI, HDMI – SDI.

BarnMini - 22 (10G/12G)

BarnMini-02.png

SFP to SFP converter

BarnMini-22 is the heir of BarnMini-02, increasing the maximum bandwidth up to 12G and adding remote monitoring via TCP/IP.

BarnMini-22 can be used for fiber conversion between multimode and single mode, Ethernet to fiber, CWDM fiber color conversion or any other combination of signals depending on the SFP selections.

BarnMini-22 is a “Norwegian army knife” –  application can be changed on the fly by replacing the SFPs.

bottom of page